Dầu tổng hợp gia công cắt gọt Total Vulsol MSF 7200

Package: 20 liters/can

Information:

Synthetic cutting fluid for machining and grinding a wide range of metals

UTILISATIONS

• Total Vulsol MSF 7200 is recommended for machining and grinding steel and its alloys as well as non ferrous metals.
• Total Vulsol MSF 7200 is also designed for machining plastic materials as well as for machining and polishing special optical lenses.
• Recommended rates of use:

– grinding: 3 – 4%

– machining: 4 – 7%

SPECIFICATIONS

ISO 6743/7 – ISO-L MAH

ADVANTAGES

• Total Vulsol MSF 7200 is very easy to use, simply by pouring it into good qualitynwater.
• Excellent cooling and lubricant power.
• Efficient protection of machined parts and machines against corrosion.
• Good mechanical performances, providing:

– Reduced cutting efforts

– Extended tool lifetime

– Very good surface finish to parts.

• Properties in service:

– Excellent stability over time increases drain intervals;

– Cuttings have low rate of humidity;

– Good anti-foaming properties.

• Resist to the development of bacteria and mould very well, so is more environmentally and operator friendly.
• Very multifunctional.
• Very good separation of tramp oils and settling of sludges.
• Very good detergent power.

HEALTH AND SAFETY

• Does not contain: formaldehyde liberators or boron.
• Is free of: chlorine, PTBB, nitrite, DEA and phenol.

RECOMMENDATIONS FOR USE

• To ensure good conservation of the fluid’s properties through time and thus increase its lifetime, we recommend:

– Regular monitoring of the concentration of the bath with a refractometer. Do not forget to multiply the reading value by the refractometric factor.

– Regular monitoring of the pH of the emulsion and the hardness of the water.

• Total offers its clients a regular laboratory fluid analysis service:

SOLUBLE CHECK.

Get in touch with your sales contact to obtain further information.

• Before using any fluid for the first time or before each change, we recommend cleaning the machine with a specific cleaning product:

CONTRAM CB 3.

• If punctual top-ups of Biocide are required, Total offers an efficient product:

EBOTEC BT 80.

Your sales and technical contacts are ready to provide you further information.